Click on image(s) to enlarge
The advanced Pixsys DRR245 process controller is specifically designed for industrial control panels where
the controller/indicator has to be mounted on a DIN rail
The Pixsys DRR245 process controller features universal input configurable for up to 18 different sensor options and is suitable both for stand-alone installation and for remote control via RS485 communications. These features make the Pixsys DRR245 process controller ideal for a whole range of industrial applications.
A main feature of the Pixsys DRR245 process controller is the many types of sensor input for which the unit
is configurable. The Pixsys DRR245 process controller accepts input from a full range of thermocouples, RTDs,
current transformers, and potentiometers. Output options available to the Pixsys DRR245 process controller
include relays (including Open/Close logic for valves), SSR, 4-20mA and 0-10 Volt (both for control and/or
rescalable retransmission of setpoint/process value). The Pixsys DRR245 process controller has an extended
power supply range of 24 to 265Vac/dc.
The Pixsys DRR245 process controller also has a retransmission function to convert signal or thermocouple
input to output (either 4-20mA or 0-10V). Serial communication via RS485/ModbusRTU protocol and load
monitoring via current transformer are both standard functions of the Pixsys DRR245 process controller. A
Latch-on function for sensor calibration (including load cells) is also included.
A Windows®-based software
package is available to set all parameters on PC and save the programs to/from controllers, for archive purposes,
and to reduce the time required for start-up. A memory card with internal battery is provided with the Pixsys
DRR245 process controller which allows the parameters and settings to be duplicated within seconds without
connecting the controller to a power supply. An additional Memory Card also allows upgrade of firmware.
The Pixsys DRR245 process controller is approved by CE, CSA and UL.
Technical
data
- BOX: standard DIN 43880
- DIN rail EN 50022
-
SUPPLY: 24-230 Vac/dc +/-15%, 50/60Hz
-
POWER CONSUMPTION: 3W
- DISPLAY: dual 4 digits, 8 red LEDs, decimal point
- OPERATING CONDITIONS: 0-45°C, 35..95rH%
-
INPUTS: 1 configurable for TC K, J, S, R, PT100 (2 ranges), NI100, PT1000, PT500, PTC1K, NTC10K, 0-10V, 0/4-20mA, 0-40mV, Potentiometers <=6KΩ, <=150KΩ, TA 50mA
-
OUTPUTS: 2 relays 5A resistive + 1 logic SSR 12V-30mA / 4-20mA /
0-10Volt for control or retransmission (4000 points accuracy)
- RS485 Modbus RTU (57600baud max)
-
Input Transformer 50mA for Loop Break Alarm
-
DIGITAL INPUT: Tuning Start, Setpoint change, selection Man/Auto, Hold function, Start/Stop pre-programmed cycle
-
CONTROL MODES: ON/OFF, P, PI, PID Autotuning
-
ACCURACY: 0.5%±1digit for TC/RTD; 0.2%±1digit for V/mA
-
SAMPLING TIME: selectable (min 15ms)
-
SEALING: IP20 Terminal blocks
-
CONFIGURATION: Parameters protected by password, Memory card with battery for serial productions, software LabSoftView
-
CERTIFICATIONS: CE, CSA UL*
Click to download the PIXSYS DRR245 Installation & Operating Manual
See Also :
More product options are available, please contact the Sales Office for details.
